IT and Telecommunications
As an IT and telecom company, we strive to grow and learn as the industry evolves; it is the demand of this eve growing industry that we adapt to new ideas, principles and technologies without clinging to past and outdated concepts.
STC MRS Project
Our Project
1. Installation of Telecommunication Cabinets 15U NRS & 5 wall mounted, supply and installation including cooling fans,power strip and connection to mains supply.
2. Supply and installation of Class U/UTP horizontal cable solutions from STC DP to customer data cabinet; Including cable pulling,marking,termination, testing and documentation | Up to 80 meters (Upvc Trunking)
3.Configuration of Routers.
4. Troubleshooting.
Wifi Access Points
1. Site Survey for Indoor/outdoor
2. Installation Switches with complete accessories, labelling
3. Installation with all accessories and labelling per indoor/Out Door Access Points
4. Indoor fibre Cable Single/Multi Mode 4 core include splicing.patch panel and bre termination
5. Dismantle
Mobile FTTB GPON & Active Ethernet Installation
Installation of ONT or CPE including the needed material (Faceplate SC, Internal Cabling (From ODB, Mobily end device or ODF to ONT or CPE) in existing Conduit or new Trunk,Fusion splicing & termina- tion) with end to end testing from ODB(LC) to Faceplate(SC/APC) with minimum one service (site survey isincluded) with conducting the UATE.
Very-Small -Aperture VSAT Project
1. Installation of complete Antenna
2. Installation of BUC and LNB.
3. Installation and con guration of idirect modem.
4. Antenna Alignment
5. Take customer signoff
FiberNet New Installation Fiber Project
1. Supply and install approved ber with accessories between ODB to ber Access Termination box (ATB).
2. Protect and label the ber in ODB side
3. Test eLife end to end eLife Service and recorded in WFM with port information
4. Power up the ONT Pulling/Splicing of Fiber cable from Fiber termination Box (ATB) to ONT as necessary.
5. Activate through WFM or Coordinate with NOC to conrm activation NOC should be able to see ONT on EMS.
6. Connect internet extenders if required based on demand.
7. Congure and demonstrate Wi-Fi Modem operation to customers.
8. Test eLife services and obtain UAT signed from customer for Internet.
FTTH New Installation Fiber Project
Installing a FTTH network is mostly straightforward ber installation with some additional components like splitters, an ONT and associated hardware at the customer premises that need to be considered. it's when you get closer to the customer premises that things change
Low current project at KAFD
FAHMARS provided new buildings require systems that provide security, safety, connectivity and building automation. To conform with the rising demand for low current system and fulil the needs of property owners, FABMARS has delivered smart building engineering with the help of advance tools and mechanisms. FAHMARS provided complete design of low current systems and communication services, including:
Fire alarm detection system
Audio-visual systems
Community antenna systems
Building automation and building management systems
Master clock system
Nurse call system
Public address system
CCTV System
DBMS System
Wi-Fi Access point system
Sudair Solar Power Plant
-Automatic Robot cleaning system Installation(PVH/Next tracker)
-PV MODULE :Installation of Bi Facial-Mono Crystaline with positive tolerance only (with 1.9 m module cable length). Weight 33 Kg, 2m by 1m
MODULE MOUNTING STRUCTURE (PVH/Nextracker)
-MVPS:
MV Power Station Earthing
Laying and termination of LV AC cables and Control Cables
Laying of MV 3Core AC cables
Installation of Early Streamer Emission Lighting Arrestor with Down conductor on precast foundation. Connecting of the LA with Guy Rods and installation of the Guy Rod foundations. Incluses installation of 3nos Lighting Earth Pits and connection of downconductor to these 3 Earth pits. Mixing of Enhancing compound and pouring the mixture in the Lighting Pits to be included Excavation and Backfilling for the Foundations and Pits
IT Consultancy
Cover
Site Survey's
Business Analysis
Implementation plans
Re-engineering solutions
Networks
We oer networing from scratch or have an existing networking solution; Modern Data ta implemen tations. Our certied IT professionals have done consulting work for companies of all si we would be more than happy to optimise your current network to help prevent wasted time.
IT Software Solutions
Beside the hardware and network solution; with design and develoment expertise in diverse platforms, best-of-breed tools and techniques, combined with industry best practices, Sun Star o ers scalable end-of-end cloud/Oine application solutions and management solutions from requirement analysis for deployment and roll out. We have expertise in software's related to Retail
Industry as Grocery, Apparel Pharmacy Cosmetics,Stationary Gift shops and related to Food and beverage industry as Coffee Shops, Restaurants,Food truck and Fast food chains and digital display cloud solutions with centralized control.We hope to come to you with desired software at a reasonable cost Sun Star's services span the following application lifecycle stages:
APPLICATION DEVELOPMENT - Providing end-to-end development from requirement analysis deployment and rollout.
APPLICATION MAINTENANCE- Changing or enhancing software to meet changing or increasing business demands in th post-rollout phase of an application.
APPLICATION SUPPORT - Providing rst second third line support and on-call support. On-call support further includes Gold (24x7) Silver and Bronze support.
APPLICATION INTEGRATION/MIGRATION/TRANSFORMATION - Replacing, migrating and integrat inglegacy.
APPLICATION MANAGEMENT - The application management layer cuts across all software engineer- ingactivities listed above. Sun Star takes complete ownership of the outsourced suite of applications as per the agreed scope and manages the support. This typically involves transition management, project management, scope change management, quality management, SLA management etc
Hardware Sales & Support Services
We offer servers,camputers.computer accessories and services by sourcing from local market and from international market as well. Our team of experts is ready to serve you when you are worried due to lack of confidence in "commitment of sercice. You are gereby requested to call us for any of requirement of computers, computerparts parts and services whatever and whenever you need.We also offer & Supply, Delive ery & Installation of:
Data Centre, Structure Cabling Systems
Digital Screens POS Machines and its
accessories
Network Switches and Wireless Routers
CCTV cameras and fire alarms
Access control and attendance
Internet service provider (ISP)
Antiviruses
PC, Server & Storage
Server & Switch Equipment maintenanc
Electrical Work
It means any labor or material used in installing altering, maintaining or extending an electrical wiring system and the appurtenances, apparatus, or equipment used in connection with the use of electrical energy in, on, outside, or attached to a building, residence, structure, property, or premises. The term includes service entrance conductors as defined by the National Electrical Code.
Design
Through our in-house team of design engineers in the Kingdom, the Engineering Division enables us to o er a complete turn-key and coordinated design/build multi-trade package to clients. Our division is furnished with professional & experienced engineers who have a passion for their work and are committed to provide outstanding design services. We employ various design software for electrical load calculations and 3-D modeling.
Installation and Commioning
As a well-established group in the industry, our electrical site team is stacked with individuals who have spent years working together. Their experience collaborating has created an efficient workflow and easy knowledge-sharing so you always receive the expertise of our entire team which includes project managers, engineers, technicians and supporting staffs.
Our Wiring Cables specified for underground wiring shall generally be elastomer or thermoplastic insulated with elastomer or thermoplastic sheathing (double insulated) complying with the relevant Standard for underground cables, be enclosed in heavy duty rigid UPVC conduit and installed in Category A wiring system. Cable markers shall be provided where trenches change direction and where cables enter/exit buildings, Markers shall be selected from the Gatic range or as otherwise approved in writing by the University's Manager (Engineering and Infrastructure).
PVC Cable
Cables shall be concealed wherever possible. Cables installed as surface wiring shall be enclosed in PVC mini ducting in lieu of PVC conduit. The duct shall be xed to the wall with suitable xings, not double-sided adhesive tape Our Wiring Cables specified for nderground wiring shall generally be elastomer or thermoplastic insulated with elastomer or thermoplastic sheathing (double insulated) complying with the relevant Standard for underground cables, be enclosed in heavy duty rigid UPVC conduit and installed in Category A wiring system. Cable markers shall be provided where trenches change direction and where cables enter/exit buildings, Markers shall be selected from the Gatic range or as otherwise approved in writing by the University's Manager (Engineering and Infrastructure).
Metal Cable Duct
Where permitted to specify, metal duct shall be selected from the Dencol range, unless otherwise approved in writing by the University's Manager (Engineering and Infrastructure).
Cable Tray & Cable Ladder
Cable tray and cable ladder shall be speci ed from the Burndy or Dencol range, unless otherwise approved in writing by the University's Manager (Engineering and Infrastructure) Fifty-percent (50%) spare space shall be provided for future installation of cables. All parts of cable tray or ladder shall be galvanised, including hangers and support brackets.
Plumbing Work
The plumbing and sanitary system is an essential part of every house or bulliting Proper planning and designing of plumbing system is crucial as it takes care of the hygiene requirements of the occupants it has been reported that about 8 per cent of the construction cost of a building is marked forplumbing and sanitary work. A plumber’s job role consists of installation, repait, maintenance and servicing of plumbing things and futures. Besides having a thorough understanding of the mechanisms required for performing various tasks, a plumber should be laborious, have effective communication skills and be a result-oriented worker with a positive attitude.
Role of Plumbing
As you may be aware, water is supplied to a house or a bulliding from storage tanks through pipes. Similarly, the waste water from kitchen and washrooms is drained out with the help of pibes. Any building, be it a residential commercial or industrial, cannot function property without having plumbing and sanitary arrangements in place it is therefore, important to have regular and adequate water supply and a proper system for the disposal of waste water Plumbing cycle refers to a mechanion through which water is taken from a source Then supplied to the user, and nally waste water is collected and recycled to the source after pri treatment.
Fiber Optics
Or optical Fiber, refers to the medium and the technology associated with the transmission of information as light pulses along a glass or plastic strand or Fiber. Fiber optics is used long-distance and high-performance data networking Fiber optics are also commonly used in telecommunication services such as internet, television and telephones. As an example, companies such as Verizon and Google use Fiber optics in their Verizon FIOS and Google Fiber services, providing gigabit internet speeds to
users.
Fiber optic cables are used since they hold a number of advantages over copper cables, such as higher bandwidth and transmit speeds.
A fiber optic cable can contain a varying number of these glass fibers from a few up to a couple hundred. Surrounding the glass fiber core is another glass layer called cladding, A Layer known as a buffer tube protects the cladding, and a jacket layer acts as the final protective layer for the individual strand.
Any fiber installation project is a major undertaking Responsibility for the oversight of everything from detailed implementation plans to community relations, ensuring sufficient materials are ordered in a timely manner to safety and environmental concerns, means an intense amount of pre-work and ongoing coordination for the life of a project.
Armed with this in information, a meticulous build plan (productivity for day, week month, etc.) can be developed and the contractor can now ensure that the necessary equipment and resources are in place Procedures and processes can now also be developed and put into place to ensure that the contemplated civil build is done to standards and executed within budget and timelines.
Pre-Build Procedures
As an unfaltering believer in a pre-build survey: The verification of details contained in pre-build drawings, will emure that potential problem areas are uncovered before the contemplated work kicks-off and potentially save one a lot of trouble later. Using the information available on the pre-build drawings, walk the pegged out route by foot, to determine the following:
-Verify the soil classiffications by digging a pilot hole every km (hard, intermediate,soft)
-If the sails or soil properties are not what were expected as noted in the contract, the client must immediately be consulted
-Check and verify above and below ground utility locations Note changes in gradient and/or direction
-Identify all obvious Landmarks where the route changes direction (takephotos)
-Take photos of all obstacles along the route
-Verify HH/MH positions
-Note road/rail crossings
-Record crossings with other services
-Record the presence of structures near the trench
-Double-check the recorded details on the return journey
Fire Fighting
A fire fighting system is probably the most important of the building services, as its aim is to protect human life and property, strictly in that order. It consists of three basic parts:
A large store of water in tanks, either underground or on top of the building, called fire storage tanks, a specialised pumping system, a large network of pipes ending in either hydrants or sprinklers (nearly all buildings require both of these systems).
When you design a fire fighting system, remember the following:
Underground tanks: water must flow from the municipal supply first to the fire fighting tanks and then to the domestic water tanks. This is to prevent stagnation in the water. The overfkow from the fire fighting to the domestic tanks must be at the top, so that the fire fighting tanks remain full at all times. Normally, the fire fighting water should be segregated into two tanks, so that if one is cleaned there is some water in the other tank should a fire occur.
It is also possible to have a system in which the fire fighting and the domestic water are in a common tank. In this case, the outlets to the fire pumps are located at the bottom of the tank and the outlets to the domestic pumps must be located at a sufficient height from the tank floor to ensure that the full quantity of water required for fire fighting purposes is never drained away by the domestic pumps. The connection between the two tanks is through the suction header, a large diameter pipe that connects the all the fire pumps in the pump room. Therefore there is no need to provide any sleeve in the common wall between the two fire fighting tanks .
The connection from each tank to the suction header should be placed in a sump; if the connection is placed say 300mm above the tank bottom without a sump, then a 300mm high pool of water will remain in the tank, meaning that the entire volume of the tank water will not be useable, to which the Fire Officer will object. Ideally the bottom of the fire fighting pump room should be about Im below the bottom of the tank. This arrangement ensures positive suction for the pumps, meaning that they will always have some water in them. All pump rooms should without fail have an arrangement for floor drainage, pumps always leak. The best way to do this is to slope the floor towards a sump, and install a de-watering pump if the water cannot flow out by gravity.
In cases where there is an extreme shortage of space, one may use submersible pumps for fire fighting. This will eliminate the need for a fire fighting pump room. Create a special shaft for wet risers next to each staircase. About 800 x 1500 mm should suffice. It is better to provide this on the main landing rather than the mid landing, as the hoses will reach further onto the floor.
Milling & Paving
Milling asphalt is an environmentally friendly and very cost effective way to repair asphalt. Although appearing by sight and touch to be tough, asphalt can quickly wear down due to traffic, weather, and sunlight. The milling process consists of using a miting machine.
Backfilling
In construction, backfilling is the
process of replacing or reusing the soit that is removed during building
construction to strengthen and support a structure’s foundation or any otherstructural member.
Excavation
There are different types of soilexcavation tools and machines used in construction. Excavation of soil is necessary in construction point of view and it should be done by hand tools or machineries based on the.
400+
Employees
50+
Successful Project
7
Year of experience
Trust and Worth
Our Clients
What Our Clients Say
Testimonials
Office Manager
Sarah L.
"FAHMARS has been our go-to for all our cleaning and maintenance needs. Their team is professional, thorough, and always exceeds our expectations. Our office space has never looked better!"
CEO of Tech Solutions
John M.
"The IT support from FAHMARS is exceptional. They quickly set up our network infrastructure and have been proactive in managing our cybersecurity. Their expertise has given us peace of mind and allowed us to focus on our core business."
Project Manager
Emily R.
"FAHMARS provided us with highly skilled and reliable manpower for our project. Their recruitment process ensured we had the right people, and their support throughout was outstanding. We couldn't have completed our project on time without them."
Operations Director
Michael T.
"We use FAHMARS for multiple services, including cleaning, IT support, and manpower supply. Their consistent quality and dedication across all areas have made them an invaluable partner for our business. Highly recommend!"